After-sales Service: | Online Technical Support |
---|---|
Warranty: | One Year |
Load Way: | Electronic Load |
Display: | Digital |
Control: | Computer Control |
Weight: | 0-100Kg |
Customization: |
---|
Suppliers with verified business licenses
Pneumatic Sample Cutting Machine, Pneumatic Punch Press Tester
Automatic Dumbbell Sample Press Machine Factory
Summary:
Pneumatic Rubber Dumbbell Cutting Machine / Sample Cutter used pneumatic as motive power and it can operate once connect to the air pressure source. The machine can be appliable in cutting rubber, adhesive tape, leather and so on.
The experience will use dumbbell specimen and other special material, such as laminate board and series of composite material.Easy and safety to operate.
Specification:
Model | JD-370 Pneumatic Slicer Sample Press Cutting Machine |
Max. Force |
1T (or 5 ton for optional) |
Stroke |
100mm |
Workbench size |
230mm*250mm |
Press plate diameter |
4.2mm/wheel each lap |
Wheel diameter |
120mm |
Output source |
Min.4kg/cm2 |
Effective height |
100mm |
Abrasion speed |
0.32m/sec |
Size |
Approx 780*430*400mm |
Weight |
Approx 70kg |
Speficiations:
Operation:
1. Placing the machine on a flat surface and adjust the four foot to make them smooth, put on the
cutting pad.
2. Open the air source, adjust the valve switch of the oil and water separator behind, and adjust the
air pressure gauge to be at least 4KG.
3. Putting PU rubber on the cutting pad, then put on the cutting die and press the red button switch
with both hands (For security, please must press with two hands together). The pressure plate
downward pressure onto the die and hold for a few seconds to allow the rubber to be fully cut off,
then let go hands and take out the specimen.
4. Please turn off the air supply source after using.
Suppliers with verified business licenses